[b1]Power ISA™, Version 2.06 Revision B, July 23, 2010. It is available from power.org (http://power.org)
[IEEE1275]Boot (Initialization Configuration) Firmware: Core Requirements and Practices, 1994, This is the core standard (also known as IEEE 1275) that defines the devicetree concept adopted by the DTSpec and ePAPR. It is available from Global Engineering (http://global.ihs.com/).
[b3]PowerPC Processor Binding to IEEE 1275-1994 Standard for Boot (Initialization, Configuration) Firmware, Version 2.1, Open Firmware Working Group, (http://playground.sun.com/1275/bindings/ppc/release/ppc-2_1.html), 1996, This document specifies the PowerPC processor specific binding to the base standard.
[b4]booting-without-of.txt, Ben Herrenschmidt, Becky Bruce, et al., From the Linux kernel source tree (http://www.kernel.org/), Describes the devicetree as used by the Linux kernel.
[b5]Device Trees Everywhere, David Gibson and Ben Herrenschmidt (http://ozlabs.org/~dgibson/home/papers/dtc-paper.pdf), An overview of the concept of the devicetree and devicetree compiler.
[b6]PCI Bus Binding to: IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware, Revision 2.1, Open Firmware Working Group, 1998 (http://playground.sun.com/1275/bindings/pci/pci2_1.pdf)
[b7]Open Firmware Recommended Practice: Interrupt Mapping, Version 0.9, Open Firmware Working Group, 1996 (http://playground.sun.com/1275/practice/imap/imap0_9d.pdf)
[b8]Open Firmware Recommended Practice: Device Support Extensions, Version 1.0, Open Firmware Working Group, 1997, (http://playground.sun.com/1275/practice/devicex/dse1_0a.html) This document describes the binding for various device types such as network, RTC, keyboard, sound, etc.
[b9]Open Firmware Recommended Practice: Universal Serial Bus Binding to IEEE 1275, Version 1, Open Firmware Working Group, 1998 (http://playground.sun.com/1275/bindings/usb/usb-1_0.ps)
[CHRP]PowerPC Microprocessor Common Hardware Reference Platform (CHRP) Binding, Version 1.8, Open Firmware Working Group, 1998 (http://playground.sun.com/1275/bindings/chrp/chrp1_8a.ps). This document specifies the properties for Open PIC-compatible interrupt controllers.
[b11]CHRP ISA Interrupt Controller Device Binding, Unapproved Draft version 1.1, Open Firmware Working Group, Aug 19, 1996 (http://playground.sun.com/1275/bindings/devices/postscript/isa-pic-1_1d.ps)
[b12]The Open Programmable Interrupt Controller (PIC) Register Interface Specification, Revision 1.2, Advanced Micro Devices and Cyrix Corporation, October 1995
[b13]PCI Local Bus Specification, Revision 2.2, PCI Special Interest Group
[b14]PCI Express Base Specification, Revision 1.0a, PCI Special Interest Group
[b15]PCI-Express Binding to OF, P1275 Openboot Working Group Proposal, 18 August 2004
[PAPR]Power.org Standard for Power Architecture Platform Requirements, power.org
[b17]System V Application Binary Interface, Edition 4.1, Published by The Santa Cruz Operation, Inc., 1997
[b18]The Open Programmable Interrupt Controller (PIC) Register Interface Specification Revision 1.2, AMD and Cyrix, October 1995
[b19]RFC 2119, Key words for use in RFCs to Indicate Requirement Levels, http://www.ietf.org/rfc/rfc2119.txt
[b20]64-bit PowerPC ELF Application Binary Interface Supplement 1.9, Ian Lance Taylor, 2004
[EPAPR]Power.org Standard for Embedded Power Architecture Platform Requirements, power.org, 2011, https://www.power.org/documentation/power-org-standard-for-embedded-power-architecture-platform-requirements-epapr-v1-1-2/
[ARMv8]ARM DDI 0487 ARM(c) Architecture Reference Manual, ARMv8 for ARMv8-A architecture profile, ARM, http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487a.h/index.html